Sem som no Manjaro  [Resolvido]

Assuntos relacionados com áudio e vídeo.
Regras do fórum Leia as Regras Gerais do Manjaro Brasil em "Normatividade" e pesquise antes de postar.
Se sua dúvida foi respondida, não esqueça de marcar RESOLVIDO em seus tópicos, botão com a marca verde Imagem
Responder

Sem som no Manjaro

Mensagempor Francisco11 » 15 Mai 2016, 22:33  •  MS 1

Boa Noite, a principio não queria incomodar a comunidade e estava tentando resolver este problema, porém não consegui, estou a aproximadamente uma semana usando o Manjaro e encontrei dificuldades com o driver de audio.
Estou com dificuldades para fazer os altos falantes do notebook funcionarem. O som funciona nos fones de ouvidos e em um adaptador usb de audio.

Se alguém pudesse me ajudar agradeceria.
Abraços
Francisco

Alguns comandos e informações do sistema:

[[email protected] ~]$ systemctl status alsa
● alsa.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)


[[email protected] ~]$ systemctl status pulseaudio
● pulseaudio.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)


[[email protected] ~]$ pacman -Ss pulseaudio | grep instalado
extra/libcanberra-pulse 0.30-6 [instalado]
extra/pavucontrol 3.0-4 [instalado]
extra/pulseaudio 8.0-3 [instalado]
extra/pulseaudio-alsa 2-3 [instalado]
community/pulseaudio-ctl 1.61-1 [instalado]



[[email protected] ~]$ pacman -Ss alsa | grep instalado
extra/alsa-firmware 1.0.29-1 [instalado]
extra/alsa-lib 1.1.1-1 [instalado]
extra/alsa-oss 1.0.28-1 [instalado]
extra/alsa-plugins 1.1.1-1 [instalado]
extra/alsa-utils 1.1.1-1 [instalado]
extra/manjaro-alsa 2012.11-1 [instalado]
extra/pulseaudio-alsa 2-3 [instalado]
extra/zita-alsa-pcmi 0.2.0-3 [instalado]
multilib/lib32-alsa-lib 1.1.1-1 [instalado]
multilib/lib32-alsa-plugins 1.1.1-1 [instalado]



[[email protected] ~]$ dmesg
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.10-1-MANJARO ([email protected]) (gcc version 6.1.1 20160501 (GCC) ) #1 SMP PREEMPT Wed May 11 22:01:52 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.4-x86_64 root=UUID=795beec4-71f5-4e1d-8de6-12f6c31ab323 rw resume=UUID=352479aa-1f30-4f3a-a8cd-030d97c82c47 quiet splash
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9991fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9992000-0x00000000d9f23fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9f24000-0x00000000d9f34fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d9f35000-0x00000000da04dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da04e000-0x00000000da5dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000da5e0000-0x00000000da5e0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da5e1000-0x00000000da623fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da624000-0x00000000dac91fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dac92000-0x00000000daff2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daff3000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Digibras NH4CU53/NH4CU53, BIOS 1.01W 05/31/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd720-0x000fd72f] mapped at [ffff8800000fd720]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE
[ 0.000000] BRK [0x01b46000, 0x01b46fff] PGTABLE
[ 0.000000] BRK [0x01b47000, 0x01b47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x375ad000-0x37acdfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D9F27078 000074 (v01 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D9F32C68 00010C (v05 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D9F27180 00BAE3 (v02 HCU001 HCU00001 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DA04C080 000040
[ 0.000000] ACPI: APIC 0x00000000D9F32D78 000062 (v03 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D9F32DE0 000044 (v01 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000D9F32E28 00003C (v01 01072009 MSFT 00000097)
[ 0.000000] ACPI: MSDM 0x00000000D9F32E68 000055 (v03 01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x00000000D9F32EC0 000176 (v01 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 0x00000000D9F33038 000038 (v01 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D9F33070 000315 (v01 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D9F33388 000692 (v01 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000D9F33A20 000B22 (v01 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11f5f6000-0x11f5f9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000d9991fff]
[ 0.000000] node 0: [mem 0x00000000da5e0000-0x00000000da5e0fff]
[ 0.000000] node 0: [mem 0x00000000da624000-0x00000000dac91fff]
[ 0.000000] node 0: [mem 0x00000000daff3000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[ 0.000000] On node 0 totalpages: 1020330
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 156 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13873 pages used for memmap
[ 0.000000] DMA32 zone: 887822 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9992000-0xd9f23fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9f24000-0xd9f34fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9f35000-0xda04dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda04e000-0xda5dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda5e1000-0xda623fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdac92000-0xdaff2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88011f200000 s92696 r8192 d30184 u1048576
[ 0.000000] pcpu-alloc: s92696 r8192 d30184 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1004229
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.4-x86_64 root=UUID=795beec4-71f5-4e1d-8de6-12f6c31ab323 rw resume=UUID=352479aa-1f30-4f3a-a8cd-030d97c82c47 quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3931756K/4081320K available (5799K kernel code, 951K rwdata, 1828K rodata, 1196K init, 1156K bss, 149564K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:8448 nr_irqs:440 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1097.524 MHz processor
[ 0.000072] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.50 BogoMIPS (lpj=3658413)
[ 0.000077] pid_max: default: 32768 minimum: 301
[ 0.000088] ACPI: Core revision 20150930
[ 0.018922] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.018961] Security Framework initialized
[ 0.018965] Yama: becoming mindful.
[ 0.019519] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.021339] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.022142] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.022155] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.022515] Initializing cgroup subsys io
[ 0.022522] Initializing cgroup subsys memory
[ 0.022531] Initializing cgroup subsys devices
[ 0.022536] Initializing cgroup subsys freezer
[ 0.022540] Initializing cgroup subsys net_cls
[ 0.022543] Initializing cgroup subsys pids
[ 0.022582] CPU: Physical Processor ID: 0
[ 0.022584] CPU: Processor Core ID: 0
[ 0.022593] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.022595] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.022600] mce: CPU supports 7 MCE banks
[ 0.022621] CPU0: Thermal monitoring enabled (TM1)
[ 0.022632] process: using mwait in idle threads
[ 0.022639] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.022641] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.023429] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[ 0.025886] ftrace: allocating 23012 entries in 90 pages
[ 0.049559] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.050052] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083066] TSC deadline timer enabled
[ 0.083072] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.083116] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.083161] ... version: 3
[ 0.083163] ... bit width: 48
[ 0.083165] ... generic registers: 8
[ 0.083168] ... value mask: 0000ffffffffffff
[ 0.083170] ... max period: 0000ffffffffffff
[ 0.083172] ... fixed-purpose events: 3
[ 0.083174] ... event mask: 00000007000000ff
[ 0.113159] x86: Booting SMP configuration:
[ 0.113165] .... node #0, CPUs: #1
[ 0.114284] microcode: CPU1 microcode updated early to revision 0x29, date = 2013-06-12
[ 0.116512] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.116537] x86: Booted up 1 node, 2 CPUs
[ 0.116540] smpboot: Total of 2 processors activated (4391.01 BogoMIPS)
[ 0.118826] devtmpfs: initialized
[ 0.126715] PM: Registering ACPI NVS region [mem 0xd9f35000-0xda04dfff] (1150976 bytes)
[ 0.126747] PM: Registering ACPI NVS region [mem 0xda5e1000-0xda623fff] (274432 bytes)
[ 0.126893] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.127072] pinctrl core: initialized pinctrl subsystem
[ 0.127146] RTC time: 0:33:59, date: 05/16/16
[ 0.127368] NET: Registered protocol family 16
[ 0.143123] cpuidle: using governor ladder
[ 0.156463] cpuidle: using governor menu
[ 0.156564] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.156567] ACPI: bus type PCI registered
[ 0.156570] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.156692] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.156697] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.156711] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.156881] PCI: Using configuration type 1 for base access
[ 0.157298] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.157312] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.170421] ACPI: Added _OSI(Module Device)
[ 0.170425] ACPI: Added _OSI(Processor Device)
[ 0.170428] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.170431] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.175125] ACPI Error: [CPST] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.175136] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff88011a8aca50), AE_NOT_FOUND (20150930/psparse-542)
[ 0.176760] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.182515] ACPI: Dynamic OEM Table Load:
[ 0.182530] ACPI: SSDT 0xFFFF880119C77000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.183787] ACPI: Dynamic OEM Table Load:
[ 0.183797] ACPI: SSDT 0xFFFF8800DA8A9000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.184885] ACPI: Dynamic OEM Table Load:
[ 0.184894] ACPI: SSDT 0xFFFF880119CF5800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.186262] ACPI : EC: EC started
[ 0.193273] ACPI Error: [CPST] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 0.193287] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff88011a8aca50), AE_NOT_FOUND (20150930/psparse-542)
[ 0.193315] ACPI : EC: Fail in evaluating the _REG object of EC device. Broken bios is suspected.
[ 0.193326] ACPI: Interpreter enabled
[ 0.193338] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.193347] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.193379] ACPI: (supports S0 S3 S4 S5)
[ 0.193381] ACPI: Using IOAPIC for interrupt routing
[ 0.193435] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.213659] ACPI: Power Resource [FN00] (off)
[ 0.213843] ACPI: Power Resource [FN01] (off)
[ 0.214022] ACPI: Power Resource [FN02] (off)
[ 0.214196] ACPI: Power Resource [FN03] (off)
[ 0.214373] ACPI: Power Resource [FN04] (off)
[ 0.215604] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.215616] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.215957] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.216232] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.216236] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.217105] PCI host bridge to bus 0000:00
[ 0.217112] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.217116] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.217120] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.217124] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.217128] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.217132] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.217135] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.217139] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.217143] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.217147] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.217151] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.217166] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.217362] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[ 0.217390] pci 0000:00:02.0: reg 0x10: [mem 0xf5000000-0xf53fffff 64bit]
[ 0.217403] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.217412] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.217668] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.217729] pci 0000:00:16.0: reg 0x10: [mem 0xf7c0a000-0xf7c0a00f 64bit]
[ 0.217850] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.218033] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.218086] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c08000-0xf7c083ff]
[ 0.218223] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.218344] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.218435] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.218495] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c00000-0xf7c03fff 64bit]
[ 0.218627] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.218728] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.218808] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.218957] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.219055] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.219135] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.219284] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.219386] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.219466] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.219617] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.219718] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.219797] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 0.219951] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.220054] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.220146] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.220200] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c07000-0xf7c073ff]
[ 0.220339] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.220459] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.220540] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[ 0.220868] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.220925] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.220943] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.220961] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.220979] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.220997] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.221015] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c06000-0xf7c067ff]
[ 0.221092] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.221253] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.221291] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c05000-0xf7c050ff 64bit]
[ 0.221338] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.221668] pci 0000:01:00.0: [10ec:8176] type 00 class 0x028000
[ 0.221775] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.221863] pci 0000:01:00.0: reg 0x18: [mem 0xf7200000-0xf7203fff 64bit]
[ 0.222124] pci 0000:01:00.0: supports D1 D2
[ 0.222127] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222209] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.226663] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.226674] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.226684] pci 0000:00:1c.0: bridge window [mem 0xf7200000-0xf7bfffff]
[ 0.226706] pci 0000:00:1c.0: bridge window [mem 0xf1e00000-0xf27fffff 64bit pref]
[ 0.226847] pci 0000:02:00.0: [10ec:5289] type 00 class 0xff0000
[ 0.226921] pci 0000:02:00.0: reg 0x10: [mem 0xf6800000-0xf680ffff]
[ 0.227151] pci 0000:02:00.0: supports D1 D2
[ 0.227155] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.227221] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.227317] pci 0000:02:00.2: [10ec:8168] type 00 class 0x020000
[ 0.227390] pci 0000:02:00.2: reg 0x10: [io 0xd000-0xd0ff]
[ 0.227443] pci 0000:02:00.2: reg 0x18: [mem 0xf1404000-0xf1404fff 64bit pref]
[ 0.227477] pci 0000:02:00.2: reg 0x20: [mem 0xf1400000-0xf1403fff 64bit pref]
[ 0.227602] pci 0000:02:00.2: supports D1 D2
[ 0.227605] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.233335] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.233346] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.233355] pci 0000:00:1c.1: bridge window [mem 0xf6800000-0xf71fffff]
[ 0.233377] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf1dfffff 64bit pref]
[ 0.233487] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.233495] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.233503] pci 0000:00:1c.2: bridge window [mem 0xf5e00000-0xf67fffff]
[ 0.233514] pci 0000:00:1c.2: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.233619] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.233626] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.233634] pci 0000:00:1c.3: bridge window [mem 0xf5400000-0xf5dfffff]
[ 0.233646] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.235037] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.235142] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.235243] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.235342] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.235441] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.235542] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.235645] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.235744] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.237211] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.237288] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.237477] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.237482] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.237488] vgaarb: loaded
[ 0.237490] vgaarb: bridge control possible 0000:00:02.0
[ 0.237688] PCI: Using ACPI for IRQ routing
[ 0.241316] PCI: pci_cache_line_size set to 64 bytes
[ 0.241409] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.241413] e820: reserve RAM buffer [mem 0xd9992000-0xdbffffff]
[ 0.241417] e820: reserve RAM buffer [mem 0xda5e1000-0xdbffffff]
[ 0.241421] e820: reserve RAM buffer [mem 0xdac92000-0xdbffffff]
[ 0.241424] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.241428] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.241667] NetLabel: Initializing
[ 0.241670] NetLabel: domain hash size = 128
[ 0.241672] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.241697] NetLabel: unlabeled traffic allowed by default
[ 0.241750] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.241762] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.243808] clocksource: Switched to clocksource hpet
[ 0.254287] pnp: PnP ACPI init
[ 0.254472] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.254482] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.254639] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.254644] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.254649] system 00:01: [io 0xffff] has been reserved
[ 0.254653] system 00:01: [io 0xffff] has been reserved
[ 0.254657] system 00:01: [io 0x0400-0x0453] could not be reserved
[ 0.254661] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.254665] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.254669] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.254675] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.254731] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.254833] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.254840] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.254941] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.254947] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.255051] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.255405] pnp 00:06: Plug and Play ACPI device, IDs SYN2901 SYN2900 SYN0002 PNP0f13 (active)
[ 0.255984] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.255989] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.255993] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.255997] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.256002] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.256006] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.256010] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.256014] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.256018] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.256023] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.256027] system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.256033] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256339] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[ 0.256343] system 00:08: [mem 0x40000000-0x401fffff] has been reserved
[ 0.256349] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.257251] pnp: PnP ACPI: found 9 devices
[ 0.265323] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.265395] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.265402] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.265413] pci 0000:00:1c.0: bridge window [mem 0xf7200000-0xf7bfffff]
[ 0.265421] pci 0000:00:1c.0: bridge window [mem 0xf1e00000-0xf27fffff 64bit pref]
[ 0.265434] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.265440] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.265450] pci 0000:00:1c.1: bridge window [mem 0xf6800000-0xf71fffff]
[ 0.265458] pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf1dfffff 64bit pref]
[ 0.265469] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.265475] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
[ 0.265485] pci 0000:00:1c.2: bridge window [mem 0xf5e00000-0xf67fffff]
[ 0.265492] pci 0000:00:1c.2: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.265504] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.265509] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
[ 0.265519] pci 0000:00:1c.3: bridge window [mem 0xf5400000-0xf5dfffff]
[ 0.265527] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.265541] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.265545] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.265549] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.265553] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.265557] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.265561] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.265564] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.265568] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.265572] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.265576] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[ 0.265580] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.265584] pci_bus 0000:01: resource 1 [mem 0xf7200000-0xf7bfffff]
[ 0.265587] pci_bus 0000:01: resource 2 [mem 0xf1e00000-0xf27fffff 64bit pref]
[ 0.265591] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.265595] pci_bus 0000:02: resource 1 [mem 0xf6800000-0xf71fffff]
[ 0.265599] pci_bus 0000:02: resource 2 [mem 0xf1400000-0xf1dfffff 64bit pref]
[ 0.265602] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.265606] pci_bus 0000:03: resource 1 [mem 0xf5e00000-0xf67fffff]
[ 0.265610] pci_bus 0000:03: resource 2 [mem 0xf0a00000-0xf13fffff 64bit pref]
[ 0.265613] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.265617] pci_bus 0000:04: resource 1 [mem 0xf5400000-0xf5dfffff]
[ 0.265620] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
[ 0.265680] NET: Registered protocol family 2
[ 0.265974] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.266125] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.266256] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.266303] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.266340] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.266438] NET: Registered protocol family 1
[ 0.266470] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.300672] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.300775] Unpacking initramfs...
[ 0.461399] Freeing initrd memory: 5252K (ffff8800375ad000 - ffff880037ace000)
[ 0.461415] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.461420] software IO TLB [mem 0xd5992000-0xd9992000] (64MB) mapped at [ffff8800d5992000-ffff8800d9991fff]
[ 0.461534] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.461537] hw unit of domain pp0-core 2^-16 Joules
[ 0.461540] hw unit of domain package 2^-16 Joules
[ 0.461542] hw unit of domain pp1-gpu 2^-16 Joules
[ 0.461699] Scanning for low memory corruption every 60 seconds
[ 0.462164] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.462769] Initialise system trusted keyring
[ 0.462951] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.466142] zbud: loaded
[ 0.466562] VFS: Disk quotas dquot_6.6.0
[ 0.466631] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.466911] Key type big_key registered
[ 0.467325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.467382] io scheduler noop registered
[ 0.467389] io scheduler deadline registered
[ 0.467461] io scheduler cfq registered
[ 0.467567] io scheduler bfq registered (default)
[ 0.467569] BFQ I/O-scheduler: v7r11
[ 0.468600] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.468615] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.468639] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.468642] vesafb: scrolling: redraw
[ 0.468645] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.468680] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k
[ 0.616857] Console: switching to colour frame buffer device 170x48
[ 0.764441] fb0: VESA VGA frame buffer device
[ 0.764481] intel_idle: MWAIT substates: 0x21120
[ 0.764484] intel_idle: v0.4.1 model 0x2A
[ 0.764487] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.764696] GHES: HEST is not enabled!
[ 0.764812] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.765778] Linux agpgart interface v0.103
[ 0.766205] rtc_cmos 00:02: RTC can wake from S4
[ 0.766451] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.766490] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.766515] Intel P-state driver initializing.
[ 0.766718] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.767944] NET: Registered protocol family 10
[ 0.768403] NET: Registered protocol family 17
[ 0.768916] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[ 0.768933] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[ 0.769086] microcode: Microcode Update Driver: v2.01 <[email protected]>, Peter Oruba
[ 0.769751] registered taskstats version 1
[ 0.769787] Loading compiled-in X.509 certificates
[ 0.769839] zswap: loaded using pool lzo/zbud
[ 0.770745] Magic number: 0:222:557
[ 0.770897] rtc_cmos 00:02: setting system clock to 2016-05-16 00:33:59 UTC (1463358839)
[ 0.771151] PM: Checking hibernation image partition UUID=352479aa-1f30-4f3a-a8cd-030d97c82c47
[ 0.771159] PM: Hibernation image not present or could not be loaded.
[ 0.774293] Freeing unused kernel memory: 1196K (ffffffff818ef000 - ffffffff81a1a000)
[ 0.774298] Write protecting the kernel read-only data: 8192k
[ 0.774905] Freeing unused kernel memory: 332K (ffff8800015ad000 - ffff880001600000)
[ 0.776338] Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000)
[ 0.793842] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.862584] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYN0] at 0x60,0x64 irq 1,12
[ 0.869392] i8042: Detected active multiplexing controller, rev 1.0
[ 0.870732] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.873352] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.873451] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.873519] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.873584] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.889467] ACPI: bus type USB registered
[ 0.889521] usbcore: registered new interface driver usbfs
[ 0.889542] usbcore: registered new interface driver hub
[ 0.889597] usbcore: registered new device driver usb
[ 0.890294] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.890605] ehci-pci: EHCI PCI platform driver
[ 0.890861] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.890875] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.890897] ehci-pci 0000:00:1a.0: debug port 2
[ 0.892898] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 24
[ 0.894803] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.894827] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c08000
[ 0.899561] SCSI subsystem initialized
[ 0.902095] libata version 3.00 loaded.
[ 0.903859] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.904616] hub 1-0:1.0: USB hub found
[ 0.904632] hub 1-0:1.0: 2 ports detected
[ 0.905152] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.905165] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.905186] ehci-pci 0000:00:1d.0: debug port 2
[ 0.909115] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.909140] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c07000
[ 0.917181] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.917758] hub 2-0:1.0: USB hub found
[ 0.918017] hub 2-0:1.0: 2 ports detected
[ 0.918721] ahci 0000:00:1f.2: version 3.0
[ 0.930559] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 impl SATA mode
[ 0.930568] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.940293] scsi host0: ahci
[ 0.940434] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.943853] scsi host1: ahci
[ 0.950512] scsi host2: ahci
[ 0.951304] scsi host3: ahci
[ 0.951420] ata1: SATA max UDMA/133 abar [email protected] port 0xf7c06100 irq 25
[ 0.951424] ata2: DUMMY
[ 0.951428] ata3: SATA max UDMA/133 abar [email protected] port 0xf7c06200 irq 25
[ 0.951431] ata4: DUMMY
[ 1.210554] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.223895] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.270575] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.271040] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.271058] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88011a8b1fa0), AE_NOT_FOUND (20150930/psparse-542)
[ 1.272574] ata1.00: ATA-9: SanDisk SDSSDA240G, U21010RL, max UDMA/133
[ 1.272584] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.277025] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
[ 1.277044] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88011a8b1fa0), AE_NOT_FOUND (20150930/psparse-542)
[ 1.277205] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.279033] ata3.00: ATAPI: TSSTcorp CDDVDW SU-208DB, TE00, max UDMA/100
[ 1.281881] ata1.00: configured for UDMA/133
[ 1.282080] ata3.00: configured for UDMA/100
[ 1.286068] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDA24 10RL PQ: 0 ANSI: 5
[ 1.291128] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SU-208DB TE00 PQ: 0 ANSI: 5
[ 1.308049] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.308180] sd 0:0:0:0: [sda] Write Protect is off
[ 1.308187] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.308228] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.308985] sda: sda1 sda2 sda3 < sda5 >
[ 1.309705] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.324290] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.324307] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.324632] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.334704] hub 1-1:1.0: USB hub found
[ 1.334868] hub 1-1:1.0: 4 ports detected
[ 1.348337] hub 2-1:1.0: USB hub found
[ 1.348493] hub 2-1:1.0: 4 ports detected
[ 1.463827] tsc: Refined TSC clocksource calibration: 1097.506 MHz
[ 1.463837] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfd1e55c821, max_idle_ns: 440795210298 ns
[ 1.521217] PM: Starting manual resume from disk
[ 1.521226] PM: Hibernation image partition 8:5 present
[ 1.521229] PM: Looking for hibernation image.
[ 1.521488] PM: Image not found (code -22)
[ 1.521493] PM: Hibernation image not present or could not be loaded.
[ 1.600495] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.622886] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.738060] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.744893] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 1.745110] systemd[1]: Detected architecture x86-64.
[ 1.746870] systemd[1]: Set hostname to <francisco11>.
[ 1.918659] systemd[1]: Listening on Journal Socket.
[ 1.918786] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.919887] systemd[1]: Listening on Process Core Dump Socket.
[ 1.920585] systemd[1]: Created slice User and Session Slice.
[ 1.920659] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.926299] systemd[1]: Created slice System Slice.
[ 1.937324] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.937697] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.938707] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.938819] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.939136] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.947357] systemd[1]: Mounting Huge Pages File System...
[ 1.947606] systemd[1]: Listening on udev Control Socket.
[ 1.948611] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.949689] systemd[1]: Starting Setup Virtual Console...
[ 1.954401] EXT4-fs (sda2): re-mounted. Opts: discard
[ 1.955993] systemd[1]: Mounting Debug File System...
[ 1.956056] systemd[1]: Reached target Login Prompts.
[ 1.956122] systemd[1]: Reached target Encrypted Volumes.
[ 1.956156] systemd[1]: Reached target Slices.
[ 1.956258] systemd[1]: Listening on udev Kernel Socket.
[ 1.956333] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.956736] systemd[1]: Created slice system-getty.slice.
[ 1.959084] systemd[1]: Starting Load Kernel Modules...
[ 1.959218] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.959276] systemd[1]: Reached target Remote File Systems.
[ 1.960193] systemd[1]: Starting Journal Service...
[ 1.964723] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.966147] systemd[1]: Mounted Huge Pages File System.
[ 1.966785] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.967415] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.973730] systemd[1]: Mounted Debug File System.
[ 2.000902] FS-Cache: Loaded
[ 2.013627] systemd[1]: systemd-vconsole-setup.service: Main process exited, code=exited, status=1/FAILURE
[ 2.014235] systemd[1]: Failed to start Setup Virtual Console.
[ 2.014416] systemd[1]: systemd-vconsole-setup.service: Unit entered failed state.
[ 2.014428] systemd[1]: systemd-vconsole-setup.service: Failed with result 'exit-code'.
[ 2.026017] RPC: Registered named UNIX socket transport module.
[ 2.026024] RPC: Registered udp transport module.
[ 2.026026] RPC: Registered tcp transport module.
[ 2.026029] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.041177] systemd[1]: Starting Load/Save Random Seed...
[ 2.045521] systemd[1]: Starting udev Coldplug all Devices...
[ 2.047481] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 2.052232] FS-Cache: Netfs 'nfs' registered for caching
[ 2.058934] systemd[1]: Started Load Kernel Modules.
[ 2.061712] systemd[1]: Started Load/Save Random Seed.
[ 2.114683] systemd[1]: Starting Apply Kernel Variables...
[ 2.115939] systemd[1]: Mounting Configuration File System...
[ 2.118493] systemd[1]: Started Create Static Device Nodes in /dev.
[ 2.118804] systemd[1]: Reached target Local File Systems (Pre).
[ 2.122414] systemd[1]: Mounting /tmp...
[ 2.123713] systemd[1]: Starting udev Kernel Device Manager...
[ 2.125866] systemd[1]: Mounted Configuration File System.
[ 2.142795] systemd[1]: Mounted /tmp.
[ 2.147863] systemd[1]: Started Apply Kernel Variables.
[ 2.166300] systemd[1]: Started udev Coldplug all Devices.
[ 2.194418] systemd[1]: Starting Show Plymouth Boot Screen...
[ 2.269059] systemd[1]: Started udev Kernel Device Manager.
[ 2.324003] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 2.324014] ACPI: Power Button [PWRB]
[ 2.324113] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 2.324119] ACPI: Sleep Button [SLPB]
[ 2.324211] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7
[ 2.324258] ACPI: Lid Switch [LID0]
[ 2.324352] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 2.324357] ACPI: Power Button [PWRF]
[ 2.336261] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.360682] ACPI: AC Adapter [AC0] (off-line)
[ 2.401229] systemd[1]: Started Journal Service.
[ 2.434828] systemd-journald[170]: Received request to flush runtime journal from PID 1
[ 2.445747] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.478396] clocksource: Switched to clocksource tsc
[ 2.497259] ACPI: Battery Slot [BAT0] (battery present)
[ 2.498869] wmi: Mapper loaded
[ 2.501212] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.501219] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.510630] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.510637] ACPI: Thermal Zone [TZ00] (52 C)
[ 2.522814] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[ 2.522829] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.523100] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000402-0x0000000000000441 (\PMEN) (20150930/utaddress-254)
[ 2.523110] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000043F (\PMS0) (20150930/utaddress-254)
[ 2.523117] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ 2.523124] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.523130] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 2.523137] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.523140] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 2.523146] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.523149] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ 2.523155] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.523158] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.532962] r8168 Gigabit Ethernet driver 8.040.00-NAPI loaded
[ 2.532985] r8168 0000:02:00.2: can't disable ASPM; OS doesn't have ASPM control
[ 2.582897] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 2.582910] r8168 Copyright (C) 2015 Realtek NIC software team <[email protected]>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 2.597083] [drm] Initialized drm 1.1.0 20060810
[ 2.808965] Adding 3939924k swap on /dev/sda5. Priority:-1 extents:1 across:3939924k SSDscFS
[ 2.823504] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'n550jx-lfe-fix'
[ 2.863818] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 2.868138] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.868146] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.868151] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 2.868154] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.868158] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.868162] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 2.868167] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 2.884402] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.884784] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.884904] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.887776] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 2.935544] asus_wmi: Asus Management GUID not found
[ 2.960145] rtl8192ce: Using firmware rtlwifi/rtl8192cfwU_B.bin
[ 2.969022] iTCO_vendor_support: vendor-support=0
[ 2.979077] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.979150] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.979360] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.992619] r8168 0000:02:00.2 enp2s0f2: renamed from eth0
[ 3.021908] [drm] Memory usable by graphics device = 2048M
[ 3.021916] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 3.021919] fb: switching to inteldrmfb from VESA VGA
[ 3.021964] Console: switching to colour dummy device 80x25
[ 3.024400] cfg80211: World regulatory domain updated:
[ 3.024406] cfg80211: DFS Master region: unset
[ 3.024409] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.024414] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.024418] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.024421] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.024426] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3.024430] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3.024434] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3.024437] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.024441] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3.025071] [drm] Replacing VGA console driver
[ 3.028618] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 3.029076] rtlwifi: rtlwifi: wireless switch is on
[ 3.039429] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.039435] [drm] Driver supports precise vblank timestamp query.
[ 3.040877] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.082778] intel_rapl: Found RAPL domain package
[ 3.082786] intel_rapl: Found RAPL domain core
[ 3.082791] intel_rapl: Found RAPL domain uncore
[ 3.082803] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 3.091107] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.091657] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 3.094996] fbcon: inteldrmfb (fb0) is primary device
[ 3.095108] Console: switching to colour frame buffer device 170x48
[ 3.095123] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.101871] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 3.104366] rtl8192ce 0000:01:00.0 wlp1s0: renamed from wlan0
[ 3.188362] random: nonblocking pool is initialized
[ 3.215235] Non-volatile memory driver v1.3
[ 3.405496] psmouse serio2: synaptics: queried max coordinates: x [..5252], y [..4362]
[ 3.471311] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 547508
[ 3.512999] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 3.517378] mousedev: PS/2 mouse device common for all mice
[ 4.247855] media: Linux media interface: v0.10
[ 4.281172] Linux video capture interface: v2.00
[ 4.322998] uvcvideo: Found UVC 1.00 device HD Webcam (04f2:b351)
[ 4.339134] input: HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input17
[ 4.339327] usbcore: registered new interface driver uvcvideo
[ 4.339328] USB Video Class driver (1.1.1)
[ 4.829771] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 5.227758] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 5.240028] IPv6: ADDRCONF(NETDEV_UP): enp2s0f2: link is not ready
[ 5.240465] enp2s0f2: 0xffffc90000744000, 80:ee:73:d5:72:d2, IRQ 27
[ 5.314007] IPv6: ADDRCONF(NETDEV_UP): enp2s0f2: link is not ready
[ 5.478111] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 6.266602] fuse init (API version 7.23)
[ 10.860991] wlp1s0: authenticate with c8:3a:35:13:dd:38
[ 11.254282] wlp1s0: send auth to c8:3a:35:13:dd:38 (try 1/3)
[ 11.357278] wlp1s0: send auth to c8:3a:35:13:dd:38 (try 2/3)
[ 11.359687] wlp1s0: authenticated
[ 11.360590] wlp1s0: associate with c8:3a:35:13:dd:38 (try 1/3)
[ 11.364491] wlp1s0: RX AssocResp from c8:3a:35:13:dd:38 (capab=0x411 status=0 aid=1)
[ 11.365101] wlp1s0: associated
[ 11.365175] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
Editado pela última vez por Holmes em 16 Mai 2016, 10:06, em um total de 1 vez.
Razão: correções pontuais
Avatar do usuário
Francisco11
Aprendiz
Aprendiz

 
Mensagens: 25
Registro: 14 Mai 2016, 19:51
Agradeceu: 3 vez(es)
Agradecido: 0 vez
Distro utilizada: Manjaro
Versão: 17.0.1
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem Som no Manjaro

Mensagempor chmercesmoreira » 15 Mai 2016, 22:56  •  MS 2

Olá, tentar executar os comandos que foram executados aqui: https://bbs.archlinux.org/default.html"codebox">
Código: Selecionar todos
 aplay -l

Código: Selecionar todos
 lspci -k

Código: Selecionar todos
 lsmod | grep '^snd' | column -t 

Para a gente coletar mais informações sobre seu sistema.
Editado pela última vez por chmercesmoreira em 15 Mai 2016, 22:56, em um total de 1 vez.
Razão: Correção
Imagem Imagem
chmercesmoreira
Especial
Especial

 
Mensagens: 751
Artigos: 1
Registro: 31 Jan 2016, 10:58
Agradeceu: 15 vez(es)
Agradecido: 223 vez(es)
Distro utilizada: Manjaro
Versão: 2018
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem som no Manjaro

Mensagempor Francisco11 » 16 Mai 2016, 11:36  •  MS 3

Olá segue abaixo os comandos, desculpa a demora.

Código: Selecionar todos
[[email protected] ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0


[[email protected] ~]$ lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation 7 Series Chipset Family LPC Controller (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2032
Kernel modules: i2c_i801
01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
Subsystem: AzureWave AW-NE139H Half-size Mini PCIe Card
Kernel driver in use: rtl8192ce
Kernel modules: rtl8192ce
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411 PCI Express Card Reader (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8411 PCI Express Card Reader
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
02:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device 2033
Kernel driver in use: r8168
Kernel modules: r8169, r8168


Código: Selecionar todos
[[email protected] ~]$ lsmod | grep '^snd' | column -t
snd_hda_codec_realtek  69632   1
snd_hda_codec_generic  69632   1   snd_hda_codec_realtek
snd_hda_intel          32768   5
snd_hda_codec          106496  3   snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel
snd_hda_core           49152   4   snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep              16384   1   snd_hda_codec
snd_pcm                86016   3   snd_hda_codec,snd_hda_intel,snd_hda_core
snd_timer              28672   1   snd_pcm
snd                    65536   17  snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
Editado pela última vez por Holmes em 16 Mai 2016, 11:54, em um total de 1 vez.
Razão: correções pontuais
Avatar do usuário
Francisco11
Aprendiz
Aprendiz

 
Mensagens: 25
Registro: 14 Mai 2016, 19:51
Agradeceu: 3 vez(es)
Agradecido: 0 vez
Distro utilizada: Manjaro
Versão: 17.0.1
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem som no Manjaro

Mensagempor chmercesmoreira » 16 Mai 2016, 11:58  •  MS 4

Tenta utilizar a ferramenta
Código: Selecionar todos
alsamixer
e verifica se os canais de áudio não estão mudos.
Aqui explica como fazer isso:
https://wiki.archlinux.org/index.html/Ad ... e_channels

Unmute with alsamixer
Unmuting the sound card can be done using alsamixer:
$ alsamixer
The MM label below a channel indicates that the channel is muted, and 00 indicates that it is open.
Scroll to the Master and PCM channels with the ← and → keys and unmute them by pressing the m key.
Use the ↑ key to increase the volume and obtain a value of 0 dB gain. The gain can be found in the upper left next to the Item: field.


@edit

No próprio alsamixer existe a opção de você selecionar o dispositivo de áudio, pressiona a tecla F6 dentro do alsamixer e verifica isso.
Editado pela última vez por chmercesmoreira em 16 Mai 2016, 12:05, em um total de 2 vezes.
Razão: Correção
Imagem Imagem
chmercesmoreira
Especial
Especial

 
Mensagens: 751
Artigos: 1
Registro: 31 Jan 2016, 10:58
Agradeceu: 15 vez(es)
Agradecido: 223 vez(es)
Distro utilizada: Manjaro
Versão: 2018
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem som no Manjaro

Mensagempor Francisco11 » 16 Mai 2016, 14:23  •  MS 5

Já havia tentado está opção porém não consegui. Repeti novamente e também não obtive sucesso.

Quando chegar em casa vou ler toda wiki e ver se acho alguma solução nela.

Novamente obrigado pela ajuda meu amigo chmercesmoreira.
Avatar do usuário
Francisco11
Aprendiz
Aprendiz

 
Mensagens: 25
Registro: 14 Mai 2016, 19:51
Agradeceu: 3 vez(es)
Agradecido: 0 vez
Distro utilizada: Manjaro
Versão: 17.0.1
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem som no Manjaro

Mensagempor chmercesmoreira » 16 Mai 2016, 19:28  •  MS 6

Tenta testar o som usando um live cd de outra distribuição, se funcionar é porque realmente está faltando algum pacote/configuração no Manjaro.

Eu encontrei esse problema que ocorre para alguns usuários do Manjaro com XFCE: https://wiki.manjaro.org/index.html/Volume_Stuck_on_Mute_(XFCE_Desktop)

Estou usando o XFCE atualmente e não enfrentei esse problema, mas pode ser o seu caso, depois da uma olhada.
Editado pela última vez por chmercesmoreira em 16 Mai 2016, 19:29, em um total de 1 vez.
Razão: edição
Imagem Imagem
chmercesmoreira
Especial
Especial

 
Mensagens: 751
Artigos: 1
Registro: 31 Jan 2016, 10:58
Agradeceu: 15 vez(es)
Agradecido: 223 vez(es)
Distro utilizada: Manjaro
Versão: 2018
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem som no Manjaro

Mensagempor Francisco11 » 17 Mai 2016, 00:01  •  MS 7

Olá realizei o teste com o Ubuntu 12.04 e o mesmo funcionou o áudio. Porém no Ubuntu 16.04 não funcionou.

Logo achei que fosse o kernel, então instalei o anterior que usava no Ubuntu 14.04, porém mesmo assim não funcionou.

Realizei os passos, porém novamente não consegui.

Acredito que esse problemas esteja ocorrendo com pcs com Intel HDA.

Realmente não sei como resolver este problema. :(
Avatar do usuário
Francisco11
Aprendiz
Aprendiz

 
Mensagens: 25
Registro: 14 Mai 2016, 19:51
Agradeceu: 3 vez(es)
Agradecido: 0 vez
Distro utilizada: Manjaro
Versão: 17.0.1
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem som no Manjaro

Mensagempor chmercesmoreira » 17 Mai 2016, 21:58  •  MS 8

Olá colega, encontrei algumas informações sobre os módulos de driver para sua placa de áudio Intel HDA aqui: https://help.ubuntu.com/community/HdaIntelSoundHowto

Veja se você consegue resolver seguindo esses passos e adicionando manualmente os módulos referentes a essa placa.

Esse tutorial é um pouco antigo mais talvez funcione, ele exige que você adicione módulos manualmente, editando arquivos em
Código: Selecionar todos
/etc/modprobe.d/

Não sei como é seu nível com Linux mas se você tiver alguma dificuldade pode perguntar.

@edit
E encontrei um tópico aqui do fórum onde uma pessoa passou por um problema parecido, veja se resolve seu caso também: topic3583.html
Editado pela última vez por chmercesmoreira em 17 Mai 2016, 22:00, em um total de 1 vez.
Razão: adicionar informações
Imagem Imagem
chmercesmoreira
Especial
Especial

 
Mensagens: 751
Artigos: 1
Registro: 31 Jan 2016, 10:58
Agradeceu: 15 vez(es)
Agradecido: 223 vez(es)
Distro utilizada: Manjaro
Versão: 2018
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem som no Manjaro

Mensagempor Francisco11 » 18 Mai 2016, 14:19  •  MS 9

Novamente obrigado pelo apoio.

Vou tentar novamente no final de semana, durante a semana possuo pouco tempo está muito corrida as aulas.

Abraço amigo
Francisco11
Avatar do usuário
Francisco11
Aprendiz
Aprendiz

 
Mensagens: 25
Registro: 14 Mai 2016, 19:51
Agradeceu: 3 vez(es)
Agradecido: 0 vez
Distro utilizada: Manjaro
Versão: 17.0.1
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Sem som no Manjaro

Mensagempor chmercesmoreira » 19 Mai 2016, 10:39  •  MS 10

Francisco11 escreveu:Novamente obrigado pelo apoio.

Vou tentar novamente no final de semana, durante a semana possuo pouco tempo está muito corrida as aulas.

Abraço amigo
Francisco11


Encontrei outro tutorial para você: https://bbs.archlinux.org/viewtopic.php?id=134145
Esse parece ser bem promissor.
Imagem Imagem
chmercesmoreira
Especial
Especial

 
Mensagens: 751
Artigos: 1
Registro: 31 Jan 2016, 10:58
Agradeceu: 15 vez(es)
Agradecido: 223 vez(es)
Distro utilizada: Manjaro
Versão: 2018
Ambiente: KDE
Repositório: Stable
Habilidade: Intermediate
Voltar ao topo

Compartilhar Em:

Compartilhar no Facebook Facebook Compartilhar no Twitter Twitter Compartilhar no Tuenti Tuenti Compartilhar no Sonico Sonico Compartilhar no FriendFeed FriendFeed Compartilhar no Orkut Orkut Compartilhar no Digg Digg Compartilhar no MySpace MySpace Compartilhar no Delicious Delicious Compartilhar no Technorati Technorati Google +
Próximo
Responder
Tópicos Semelhantes Estatísticas Última mensagem

Nenhum dispositivo de saída encontrado (som)

por Asakura_Hao » 04 Jul 2020, 11:38

Respostas: 5

Exibições: 536

24 Jul 2020, 11:00

por Asakura_Hao Ver última mensagem

PJE NO MANJARO

por LucasMigliorini » 20 Abr 2020, 12:28

Respostas: 5

Exibições: 670

21 Abr 2020, 23:40

por tioguda Ver última mensagem

Manjaro Brasil abandonado?

por Francis » 28 Dez 2020, 14:14

Respostas: 4

Exibições: 312

26 Jan 2021, 14:10

por Igor Isaias Banlian Ver última mensagem

reinstalação de manjaro com /home separada

por Asakura_Hao » 06 Dez 2020, 17:36

Respostas: 2

Exibições: 187

17 Dez 2020, 19:00

por Asakura_Hao Ver última mensagem

Problemas -- Xfce 4.14.2 - Kernel 5.6.16-1-MANJARO - Tampa N

por Thiago Zangaro » 18 Jun 2020, 08:59

Respostas: 4

Exibições: 429

19 Jun 2020, 02:40

por Thiago Zangaro Ver última mensagem

Voltar para Áudio e Vídeo



Quem está online

Usuários navegando neste fórum: Nenhum usuário registrado e 3 visitantes

cron
^ Voltar ao Topo