Download aqui

Aprendiz · por **Askazy** » 20 Jul 2016, 19:16 • MS 1

Boa noite pessoal,

instalei o Manjaro Gnome e estou com problemas com o wireless, infelizmente a conexão está muito lenta para fazer downloads e navegar. Alguém teve um problema parecido e conseguiu resolver?

Segue a saída do comando

Código: Selecionar todos: lspci

Código: Selecionar todos: 00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04) 01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)

Eu estou pensando em tentar instalar esse driver disponível aqui https://github.com/lwfinger/rtlwifi_new ... /rtl8723ae
mas não sei bem se da pra desinstalar depois.

Especial · por **chmercesmoreira** » 20 Jul 2016, 19:51 • MS 2

Olá colega, durante o uso da placa wireless poste aqui o log do kernel gerado pelo comando

Código: Selecionar todos: dmesg

Por favor poste a saída do comando entre as tags [ code ][ /code ]
Estou pedindo isso porque já passei por problemas de compatibilidade do driver da minha placa wireless com o Kernel e isso fazia o desempenho da mesma ficar péssimo, com muita lentidão e quedas, e quando fui analisar o log do kernel encontrei várias mensagens de erro apontando para a placa wireless. Aqui nesse tópico até ajudei uma pessoa que tinha a mesma placa que eu: -t3843.html

@edit
Dependendo das mensagem que podem aparecer no seu log podemos encontrar algo relacionado a isso:
https://wiki.archlinux.org/index.html/Wi ... Frtl8723be
Se este for o seu caso ali tem uma solução, mas precisamos primeiro analisar o seu log do kernel.

Aprendiz · por **Askazy** » 20 Jul 2016, 20:08 • MS 3

chmercesmoreira escreveu:Olá colega, durante o uso da placa wireless poste aqui o log do kernel gerado pelo comando
Código: Selecionar todos
dmesg

Por favor poste a saída do comando entre as tags [ code ][ /code ]
Estou pedindo isso porque já passei por problemas de compatibilidade do driver da minha placa wireless com o Kernel e isso fazia o desempenho da mesma ficar péssimo, com muita lentidão e quedas, e quando fui analisar o log do kernel encontrei várias mensagens de erro apontando para a placa wireless. Aqui nesse tópico até ajudei uma pessoa que tinha a mesma placa que eu: -t3843.html

@edit
Dependendo das mensagem que podem aparecer no seu log podemos encontrar algo relacionado a isso:
https://wiki.archlinux.org/index.html/Wi ... Frtl8723be
Se este for o seu caso ali tem uma solução, mas precisamos primeiro analisar o seu log do kernel.

Segue abaixo a saída do comando

Código: Selecionar todos: 0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2015-02-26 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.13-1-MANJARO ([email protected]) (gcc version 6.1.1 20160501 (GCC) ) #1 SMP PREEMPT Wed Jun 8 09:21:59 UTC 2016 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4-x86_64 root=UUID=0956c081-5ff1-428e-9a91-da4120c2d7fd rw resume=UUID=30e81cc3-5c97-4986-b337-ab1cbb312466 quiet splash [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers' [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c7d64fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7d65000-0x00000000c7f66fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c7f67000-0x00000000d81e5fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d81e6000-0x00000000daeeefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffcd0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LG Electronics U460-G.BG31P1/U560, BIOS UNCNSF0E 12/30/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask FE0000000 write-back [ 0.000000] 7 base 11F800000 mask FFF800000 uncachable [ 0.000000] 8 base 11F600000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE [ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE [ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE [ 0.000000] BRK [0x01b46000, 0x01b46fff] PGTABLE [ 0.000000] BRK [0x01b47000, 0x01b47fff] PGTABLE [ 0.000000] BRK [0x01b48000, 0x01b48fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3757f000-0x37ab6fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LGE ) [ 0.000000] ACPI: XSDT 0x00000000DAFFE170 00008C (v01 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: FACP 0x00000000DAFED000 00010C (v05 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 0x00000000DAFF0000 00CCFA (v02 LGE ZODIAC 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000DAF7C000 000040 [ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LGE LGPC 00000002 PTL 00000001) [ 0.000000] ACPI: ASF! 0x00000000DAFEF000 0000A5 (v32 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 0x00000000DAFEC000 000038 (v01 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 0x00000000DAFEB000 000098 (v03 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 0x00000000DAFEA000 00003C (v01 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: FPDT 0x00000000DAFE9000 000064 (v01 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 0x00000000DAFE8000 000926 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000DAFE7000 000A92 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: MSDM 0x00000000DAF7A000 000055 (v03 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFE5000 00003E (v01 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 0x00000000DAFE4000 00027E (v01 LGE LGPC 00000002 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x11f5f6000-0x11f5f9fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000011f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000c7d64fff] [ 0.000000] node 0: [mem 0x00000000c7f67000-0x00000000d81e5fff] [ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000011f5fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff] [ 0.000000] On node 0 totalpages: 1012608 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13752 pages used for memmap [ 0.000000] DMA32 zone: 880100 pages, LIFO batch:31 [ 0.000000] Normal zone: 2008 pages used for memmap [ 0.000000] Normal zone: 128512 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xc7d65000-0xc7f66fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd81e6000-0xdaeeefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffccffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffcd0000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88011f200000 s92696 r8192 d30184 u262144 [ 0.000000] pcpu-alloc: s92696 r8192 d30184 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 996763 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4-x86_64 root=UUID=0956c081-5ff1-428e-9a91-da4120c2d7fd rw resume=UUID=30e81cc3-5c97-4986-b337-ab1cbb312466 quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3900544K/4050432K available (5804K kernel code, 953K rwdata, 1832K rodata, 1196K init, 1156K bss, 149888K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:8448 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1895.546 MHz processor [ 0.000045] Calibrating delay loop (skipped), value calculated using timer frequency.. 3792.05 BogoMIPS (lpj=6318486) [ 0.000049] pid_max: default: 32768 minimum: 301 [ 0.000055] ACPI: Core revision 20150930 [ 0.011409] ACPI: 3 ACPI AML tables successfully acquired and loaded [ 0.011436] Security Framework initialized [ 0.011439] Yama: becoming mindful. [ 0.011763] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.013138] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013743] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013750] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.013994] Initializing cgroup subsys io [ 0.013998] Initializing cgroup subsys memory [ 0.014005] Initializing cgroup subsys devices [ 0.014008] Initializing cgroup subsys freezer [ 0.014010] Initializing cgroup subsys net_cls [ 0.014013] Initializing cgroup subsys pids [ 0.014038] CPU: Physical Processor ID: 0 [ 0.014039] CPU: Processor Core ID: 0 [ 0.014045] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.014046] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.014049] mce: CPU supports 7 MCE banks [ 0.014063] CPU0: Thermal monitoring enabled (TM1) [ 0.014072] process: using mwait in idle threads [ 0.014076] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.014077] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.014600] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000) [ 0.016518] ftrace: allocating 23015 entries in 90 pages [ 0.029980] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.030446] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063455] TSC deadline timer enabled [ 0.063460] smpboot: CPU0: Intel(R) Core(TM) i3-3227U CPU @ 1.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.063484] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.063510] ... version: 3 [ 0.063511] ... bit width: 48 [ 0.063512] ... generic registers: 4 [ 0.063514] ... value mask: 0000ffffffffffff [ 0.063515] ... max period: 0000ffffffffffff [ 0.063516] ... fixed-purpose events: 3 [ 0.063517] ... event mask: 000000070000000f [ 0.093551] x86: Booting SMP configuration: [ 0.093553] .... node #0, CPUs: #1 [ 0.096114] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.103578] #2 [ 0.104396] microcode: CPU2 microcode updated early to revision 0x1c, date = 2015-02-26 [ 0.113599] #3 [ 0.116009] x86: Booted up 1 node, 4 CPUs [ 0.116014] smpboot: Total of 4 processors activated (15170.21 BogoMIPS) [ 0.120135] devtmpfs: initialized [ 0.123144] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes) [ 0.123262] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.123365] pinctrl core: initialized pinctrl subsystem [ 0.123414] RTC time: 21:51:47, date: 07/20/16 [ 0.123543] NET: Registered protocol family 16 [ 0.143282] cpuidle: using governor ladder [ 0.159963] cpuidle: using governor menu [ 0.160029] ACPI: bus type PCI registered [ 0.160031] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.160114] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.160117] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.160124] PCI: Using configuration type 1 for base access [ 0.160349] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.160354] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.160355] mtrr: probably your BIOS does not setup all CPUs. [ 0.160356] mtrr: corrected configuration. [ 0.173692] ACPI: Added _OSI(Module Device) [ 0.173694] ACPI: Added _OSI(Processor Device) [ 0.173695] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.173697] ACPI: Added _OSI(Processor Aggregator Device) [ 0.180209] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.181034] ACPI: Dynamic OEM Table Load: [ 0.181044] ACPI: SSDT 0xFFFF8800D3C98000 00086D (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.181768] ACPI: Dynamic OEM Table Load: [ 0.181775] ACPI: SSDT 0xFFFF8800D3C71000 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.182398] ACPI: Dynamic OEM Table Load: [ 0.182404] ACPI: SSDT 0xFFFF880119EF9E00 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.183535] ACPI : EC: EC started [ 0.186616] ACPI: Interpreter enabled [ 0.186626] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580) [ 0.186633] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580) [ 0.186653] ACPI: (supports S0 S3 S4 S5) [ 0.186654] ACPI: Using IOAPIC for interrupt routing [ 0.186685] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.199101] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.199108] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.199255] \_SB_.PCI0:_OSC invalid UUID [ 0.199257] _OSC request data:1 1f 0 [ 0.199261] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.199813] PCI host bridge to bus 0000:00 [ 0.199817] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.199819] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.199822] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.199824] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window] [ 0.199827] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.199836] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.199944] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.199961] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.199968] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.199974] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.200103] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.200138] pci 0000:00:14.0: reg 0x10: [mem 0xf1600000-0xf160ffff 64bit] [ 0.200207] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.200256] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.200306] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.200342] pci 0000:00:16.0: reg 0x10: [mem 0xf1615000-0xf161500f 64bit] [ 0.200415] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.200514] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.200546] pci 0000:00:1a.0: reg 0x10: [mem 0xf161a000-0xf161a3ff] [ 0.200630] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.200695] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.200747] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.200777] pci 0000:00:1b.0: reg 0x10: [mem 0xf1610000-0xf1613fff 64bit] [ 0.200850] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.200902] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.200950] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.201038] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.201091] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.201138] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.201226] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.201277] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.201335] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.201367] pci 0000:00:1d.0: reg 0x10: [mem 0xf1619000-0xf16193ff] [ 0.201450] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.201512] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.201561] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.201755] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.201784] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.201794] pci 0000:00:1f.2: reg 0x14: [io 0x409c-0x409f] [ 0.201803] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.201813] pci 0000:00:1f.2: reg 0x1c: [io 0x4098-0x409b] [ 0.201821] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f] [ 0.201831] pci 0000:00:1f.2: reg 0x24: [mem 0xf1618000-0xf16187ff] [ 0.201870] pci 0000:00:1f.2: PME# supported from D3hot [ 0.201954] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.201975] pci 0000:00:1f.3: reg 0x10: [mem 0xf1614000-0xf16140ff 64bit] [ 0.201999] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.202189] pci 0000:01:00.0: [10ec:8723] type 00 class 0x028000 [ 0.202246] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.202286] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit] [ 0.202423] pci 0000:01:00.0: supports D1 D2 [ 0.202425] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.202486] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.206728] pci 0000:00:1c.0: PCI bridge to [bus 01-05] [ 0.206734] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.206739] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf15fffff] [ 0.206746] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.206832] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000 [ 0.206884] pci 0000:06:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.206922] pci 0000:06:00.0: reg 0x18: [mem 0xf0c04000-0xf0c04fff 64bit pref] [ 0.206946] pci 0000:06:00.0: reg 0x20: [mem 0xf0c00000-0xf0c03fff 64bit pref] [ 0.207038] pci 0000:06:00.0: supports D1 D2 [ 0.207040] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.210920] pci 0000:06:00.0: System wakeup disabled by ACPI [ 0.210990] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 0.210995] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.211005] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref] [ 0.211808] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.211872] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.211933] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7 [ 0.211992] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.212054] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.212114] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.212173] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.212232] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.212326] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.212511] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.212621] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.212623] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.212626] vgaarb: loaded [ 0.212628] vgaarb: bridge control possible 0000:00:02.0 [ 0.212738] PCI: Using ACPI for IRQ routing [ 0.214711] PCI: pci_cache_line_size set to 64 bytes [ 0.214766] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.214768] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.214770] e820: reserve RAM buffer [mem 0xc7d65000-0xc7ffffff] [ 0.214771] e820: reserve RAM buffer [mem 0xd81e6000-0xdbffffff] [ 0.214773] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.214775] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff] [ 0.214911] NetLabel: Initializing [ 0.214913] NetLabel: domain hash size = 128 [ 0.214914] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.214929] NetLabel: unlabeled traffic allowed by default [ 0.214965] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.214972] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.217004] clocksource: Switched to clocksource hpet [ 0.223348] pnp: PnP ACPI init [ 0.224152] pnp 00:00: disabling [io 0x002e-0x002f] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224155] pnp 00:00: disabling [io 0x004e-0x004f] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224158] pnp 00:00: disabling [io 0x0061] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224160] pnp 00:00: disabling [io 0x0063] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224162] pnp 00:00: disabling [io 0x0065] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224165] pnp 00:00: disabling [io 0x0067] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224167] pnp 00:00: disabling [io 0x0070] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224169] pnp 00:00: disabling [io 0x0080] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224172] pnp 00:00: disabling [io 0x0092] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224174] pnp 00:00: disabling [io 0x00b2-0x00b3] because it overlaps 0000:01:00.0 BAR 0 [io 0x0000-0x00ff] [ 0.224211] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.224213] system 00:00: [io 0x1004-0x1013] has been reserved [ 0.224216] system 00:00: [io 0xffff] has been reserved [ 0.224218] system 00:00: [io 0xffff] has been reserved [ 0.224220] system 00:00: [io 0x0400-0x0453] could not be reserved [ 0.224223] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.224225] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.224227] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.224232] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.224266] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.224326] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.224329] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.224373] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.224408] pnp 00:04: Plug and Play ACPI device, IDs ETD0e01 PNP0f13 (active) [ 0.224558] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.224561] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.224564] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.224566] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.224568] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.224571] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.224573] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.224575] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.224578] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved [ 0.224580] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.224583] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved [ 0.224586] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.224813] pnp: PnP ACPI: found 6 devices [ 0.231596] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.231631] pci 0000:01:00.0: BAR 2: assigned [mem 0xf0d00000-0xf0d03fff 64bit] [ 0.231651] pci 0000:01:00.0: BAR 0: assigned [io 0x3000-0x30ff] [ 0.231658] pci 0000:00:1c.0: PCI bridge to [bus 01-05] [ 0.231662] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.231669] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf15fffff] [ 0.231674] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.231682] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 0.231686] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] [ 0.231695] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff 64bit pref] [ 0.231704] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.231706] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.231708] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.231711] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window] [ 0.231713] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.231715] pci_bus 0000:01: resource 1 [mem 0xf0d00000-0xf15fffff] [ 0.231717] pci_bus 0000:01: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.231719] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.231722] pci_bus 0000:06: resource 2 [mem 0xf0c00000-0xf0cfffff 64bit pref] [ 0.231761] NET: Registered protocol family 2 [ 0.231954] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.232037] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.232125] TCP: Hash tables configured (established 32768 bind 32768) [ 0.232150] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.232167] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.232227] NET: Registered protocol family 1 [ 0.232246] pci 0000:00:02.0: Video device with shadowed ROM [ 0.232801] PCI: CLS 64 bytes, default 64 [ 0.232857] Unpacking initramfs... [ 0.329060] Freeing initrd memory: 5344K (ffff88003757f000 - ffff880037ab7000) [ 0.329071] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.329074] software IO TLB [mem 0xd41e6000-0xd81e6000] (64MB) mapped at [ffff8800d41e6000-ffff8800d81e5fff] [ 0.329149] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.329151] hw unit of domain pp0-core 2^-16 Joules [ 0.329152] hw unit of domain package 2^-16 Joules [ 0.329154] hw unit of domain pp1-gpu 2^-16 Joules [ 0.329316] Scanning for low memory corruption every 60 seconds [ 0.329666] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.330108] Initialise system trusted keyring [ 0.330246] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.332037] zbud: loaded [ 0.332293] VFS: Disk quotas dquot_6.6.0 [ 0.332333] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.332506] Key type big_key registered [ 0.332794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.332837] io scheduler noop registered [ 0.332841] io scheduler deadline registered [ 0.332877] io scheduler cfq registered [ 0.332935] io scheduler bfq registered (default) [ 0.332936] BFQ I/O-scheduler: v7r11 [ 0.333311] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.333320] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.333333] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.333334] vesafb: scrolling: redraw [ 0.333337] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.333348] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 4160k, total 4160k [ 0.424118] Console: switching to colour frame buffer device 170x48 [ 0.514511] fb0: VESA VGA frame buffer device [ 0.514532] intel_idle: MWAIT substates: 0x21120 [ 0.514533] intel_idle: v0.4.1 model 0x3A [ 0.514535] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.514746] GHES: HEST is not enabled! [ 0.514817] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.515300] Linux agpgart interface v0.103 [ 0.515836] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.515866] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.515879] Intel P-state driver initializing. [ 0.516052] ledtrig-cpu: registered to indicate activity on CPUs [ 0.516949] NET: Registered protocol family 10 [ 0.517454] NET: Registered protocol family 17 [ 0.517948] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1c [ 0.517969] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1c [ 0.518025] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1c [ 0.518049] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1c [ 0.518164] microcode: Microcode Update Driver: v2.01 <[email protected]uk>, Peter Oruba [ 0.518703] registered taskstats version 1 [ 0.518735] Loading compiled-in X.509 certificates [ 0.518783] zswap: loaded using pool lzo/zbud [ 0.519397] Magic number: 8:78:905 [ 0.519557] rtc_cmos 00:01: setting system clock to 2016-07-20 21:51:47 UTC (1469051507) [ 0.519766] PM: Checking hibernation image partition UUID=30e81cc3-5c97-4986-b337-ab1cbb312466 [ 0.519774] PM: Hibernation image not present or could not be loaded. [ 0.522459] Freeing unused kernel memory: 1196K (ffffffff818f0000 - ffffffff81a1b000) [ 0.522463] Write protecting the kernel read-only data: 8192k [ 0.522991] Freeing unused kernel memory: 328K (ffff8800015ae000 - ffff880001600000) [ 0.524442] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000) [ 0.541542] random: systemd-tmpfile urandom read with 7 bits of entropy available [ 0.591257] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.595422] i8042: Detected active multiplexing controller, rev 1.1 [ 0.596846] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.596922] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.596974] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.597078] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.597142] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.603361] ACPI: bus type USB registered [ 0.603416] usbcore: registered new interface driver usbfs [ 0.603440] usbcore: registered new interface driver hub [ 0.603497] usbcore: registered new device driver usb [ 0.604211] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.604479] ehci-pci: EHCI PCI platform driver [ 0.604672] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.604682] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.604701] ehci-pci 0000:00:1a.0: debug port 2 [ 0.606771] SCSI subsystem initialized [ 0.608619] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.608638] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf161a000 [ 0.610535] libata version 3.00 loaded. [ 0.617092] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.617359] hub 1-0:1.0: USB hub found [ 0.617369] hub 1-0:1.0: 3 ports detected [ 0.617848] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.617861] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.617882] ehci-pci 0000:00:1d.0: debug port 2 [ 0.621804] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.621827] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1619000 [ 0.630422] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.630711] hub 2-0:1.0: USB hub found [ 0.630721] hub 2-0:1.0: 3 ports detected [ 0.631142] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.631153] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.632268] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930 [ 0.632277] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.632529] hub 3-0:1.0: USB hub found [ 0.632541] hub 3-0:1.0: 4 ports detected [ 0.632936] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.632941] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.633121] hub 4-0:1.0: USB hub found [ 0.633132] hub 4-0:1.0: 4 ports detected [ 0.633538] ahci 0000:00:1f.2: version 3.0 [ 0.633866] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 0.633872] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.640557] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.641477] scsi host0: ahci [ 0.641647] scsi host1: ahci [ 0.641796] scsi host2: ahci [ 0.641936] scsi host3: ahci [ 0.642079] scsi host4: ahci [ 0.642219] scsi host5: ahci [ 0.642307] ata1: SATA max UDMA/133 abar [email protected] port 0xf1618100 irq 25 [ 0.642313] ata2: SATA max UDMA/133 abar [email protected] port 0xf1618180 irq 25 [ 0.642316] ata3: DUMMY [ 0.642318] ata4: DUMMY [ 0.642321] ata5: DUMMY [ 0.642323] ata6: DUMMY [ 0.923825] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.937182] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.960524] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.960562] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.961219] ata1.00: ATA-9: MZMPC032HBCD-00000, CXM1201Q, max UDMA/133 [ 0.961231] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.961730] ata1.00: configured for UDMA/133 [ 0.962525] scsi 0:0:0:0: Direct-Access ATA MZMPC032HBCD-000 201Q PQ: 0 ANSI: 5 [ 0.962888] ata2.00: ATA-8: TOSHIBA MQ01ABD032, AX005L, max UDMA/100 [ 0.962897] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.964816] ata2.00: configured for UDMA/100 [ 0.965414] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 5L PQ: 0 ANSI: 5 [ 0.970912] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 0.971023] sd 0:0:0:0: [sda] Write Protect is off [ 0.971031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.971067] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.971262] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 0.971267] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 0.971377] sd 1:0:0:0: [sdb] Write Protect is off [ 0.971384] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.971434] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.972646] sda: sda1 [ 0.973056] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.990456] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.048133] sdb: sdb1 sdb2 [ 1.048509] hub 1-1:1.0: USB hub found [ 1.048633] hub 1-1:1.0: 6 ports detected [ 1.049452] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.061302] hub 2-1:1.0: USB hub found [ 1.061339] hub 2-1:1.0: 8 ports detected [ 1.168679] usbcore: registered new interface driver rtsx_usb [ 1.317219] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 1.323848] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 1.330607] tsc: Refined TSC clocksource calibration: 1895.694 MHz [ 1.330617] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x36a690d8ff8, max_idle_ns: 881590545418 ns [ 1.583505] PM: Starting manual resume from disk [ 1.583513] PM: Hibernation image partition 8:17 present [ 1.583514] PM: Looking for hibernation image. [ 1.590046] PM: Image not found (code -22) [ 1.590049] PM: Hibernation image not present or could not be loaded. [ 1.590488] usb 1-1.2: new full-speed USB device number 4 using ehci-pci [ 1.673098] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.796161] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.800273] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.800450] systemd[1]: Detected architecture x86-64. [ 1.801464] systemd[1]: Set hostname to <rogerio-pc>. [ 1.916114] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 1.916549] systemd[1]: Created slice System Slice. [ 1.916705] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 1.916837] systemd[1]: Created slice User and Session Slice. [ 1.916855] systemd[1]: Reached target Slices. [ 1.916906] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 1.921182] systemd[1]: Listening on Journal Socket. [ 1.934124] systemd[1]: Starting Load Kernel Modules... [ 1.934864] systemd[1]: Starting Setup Virtual Console... [ 1.935552] systemd[1]: Mounting Huge Pages File System... [ 1.935592] systemd[1]: Reached target Encrypted Volumes. [ 1.935642] systemd[1]: Reached target Remote File Systems. [ 1.936489] systemd[1]: Mounting POSIX Message Queue File System... [ 1.936586] systemd[1]: Listening on udev Kernel Socket. [ 1.938257] systemd[1]: Starting Set Up Additional Binary Formats... [ 1.938321] systemd[1]: Reached target Login Prompts. [ 1.938530] systemd[1]: Created slice system-getty.slice. [ 1.938616] systemd[1]: Listening on LVM2 metadata daemon socket. [ 1.938692] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 1.939442] systemd[1]: Mounting Debug File System... [ 1.940183] systemd[1]: Starting Remount Root and Kernel File Systems... [ 1.940938] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 1.941026] systemd[1]: Listening on Journal Socket (/dev/log). [ 1.941764] systemd[1]: Starting Journal Service... [ 1.941848] systemd[1]: Listening on udev Control Socket. [ 1.942109] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 1.942383] FS-Cache: Loaded [ 1.943667] systemd[1]: Listening on Process Core Dump Socket. [ 1.945597] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 1.946068] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 173 (systemd-binfmt) [ 1.946697] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 1.948568] systemd[1]: Mounted Huge Pages File System. [ 1.948692] systemd[1]: Mounted POSIX Message Queue File System. [ 1.949749] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 1.951088] EXT4-fs (sda1): re-mounted. Opts: discard [ 1.951943] systemd[1]: Mounted Debug File System. [ 1.952530] systemd[1]: Started Set Up Additional Binary Formats. [ 1.953070] systemd[1]: Started Remount Root and Kernel File Systems. [ 1.954674] systemd[1]: Starting udev Coldplug all Devices... [ 1.955354] systemd[1]: Starting Load/Save Random Seed... [ 1.956630] systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.961438] RPC: Registered named UNIX socket transport module. [ 1.961443] RPC: Registered udp transport module. [ 1.961445] RPC: Registered tcp transport module. [ 1.961447] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.962059] systemd[1]: Started Load/Save Random Seed. [ 1.980764] FS-Cache: Netfs 'nfs' registered for caching [ 1.985060] systemd[1]: Started Load Kernel Modules. [ 1.985942] systemd[1]: Mounting Configuration File System... [ 1.986507] systemd[1]: Starting Apply Kernel Variables... [ 1.990225] systemd[1]: Mounted Configuration File System. [ 1.990815] systemd[1]: systemd-vconsole-setup.service: Main process exited, code=exited, status=1/FAILURE [ 1.991225] systemd[1]: Failed to start Setup Virtual Console. [ 1.991329] systemd[1]: systemd-vconsole-setup.service: Unit entered failed state. [ 1.991339] systemd[1]: systemd-vconsole-setup.service: Failed with result 'exit-code'. [ 1.991755] systemd[1]: Started Create Static Device Nodes in /dev. [ 1.992664] systemd[1]: Reached target Local File Systems (Pre). [ 1.995164] systemd[1]: Mounting /tmp... [ 1.995932] systemd[1]: Starting udev Kernel Device Manager... [ 1.998012] systemd[1]: Mounted /tmp. [ 1.998634] systemd[1]: Started udev Coldplug all Devices. [ 1.999080] systemd[1]: Started Apply Kernel Variables. [ 2.000047] systemd[1]: Starting Show Plymouth Boot Screen... [ 2.038228] systemd[1]: Started udev Kernel Device Manager. [ 2.053632] systemd[1]: Started Journal Service. [ 2.072847] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5 [ 2.072893] ACPI: Lid Switch [LID0] [ 2.073631] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6 [ 2.073638] ACPI: Power Button [PWRB] [ 2.073731] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0E:00/input/input7 [ 2.073736] ACPI: Sleep Button [SLPB] [ 2.074160] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 [ 2.074166] ACPI: Power Button [PWRF] [ 2.075804] systemd-journald[178]: Received request to flush runtime journal from PID 1 [ 2.083897] ACPI: AC Adapter [AC] (off-line) [ 2.133411] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254) [ 2.133421] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.133427] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 2.133434] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.133437] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 2.133443] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.133447] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 2.133452] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.133454] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.133964] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 2.138555] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.150894] ACPI: Battery Slot [CMB0] (battery present) [ 2.153960] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.153967] ACPI: Thermal Zone [TZ00] (38 C) [ 2.154273] wmi: Mapper loaded [ 2.165311] r8168 Gigabit Ethernet driver 8.040.00-NAPI loaded [ 2.165329] r8168 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.174944] [drm] Initialized drm 1.1.0 20060810 [ 2.184684] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254) [ 2.184694] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.203563] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 2.203573] r8168 Copyright (C) 2015 Realtek NIC software team <[email protected]> This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. [ 2.212952] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 2.212959] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 2.212963] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 2.212966] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 2.212969] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 2.212973] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 2.212977] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 2.229016] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 2.229115] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 2.229209] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 2.243704] [drm] Memory usable by graphics device = 2048M [ 2.243711] checking generic (e0000000 410000) vs hw (e0000000 10000000) [ 2.243714] fb: switching to inteldrmfb from VESA VGA [ 2.243748] Console: switching to colour dummy device 80x25 [ 2.244115] [drm] Replacing VGA console driver [ 2.250435] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.250439] [drm] Driver supports precise vblank timestamp query. [ 2.251133] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.266815] iTCO_vendor_support: vendor-support=0 [ 2.267883] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 2.267933] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 2.270615] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 2.282783] rtl8723ae 0000:01:00.0: enabling device (0000 -> 0003) [ 2.283611] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.288496] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 [ 2.290908] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 2.303051] intel_rapl: Found RAPL domain package [ 2.303057] intel_rapl: Found RAPL domain core [ 2.303061] intel_rapl: Found RAPL domain uncore [ 2.303071] intel_rapl: RAPL package 0 domain package locked by BIOS [ 2.304750] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin [ 2.308433] r8168 0000:06:00.0 enp6s0: renamed from eth0 [ 2.327757] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 2.328120] rtlwifi: rtlwifi: wireless switch is on [ 2.329036] cfg80211: World regulatory domain updated: [ 2.329041] cfg80211: DFS Master region: unset [ 2.329043] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 2.329046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2.329049] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 2.329052] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 2.329055] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 2.329059] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 2.329061] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 2.329064] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 2.329067] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 2.340857] clocksource: Switched to clocksource tsc [ 2.342124] random: nonblocking pool is initialized [ 2.350865] rtl8723ae 0000:01:00.0 wlp1s0: renamed from wlan0 [ 2.366931] Non-volatile memory driver v1.3 [ 2.394539] fbcon: inteldrmfb (fb0) is primary device [ 2.394692] Console: switching to colour frame buffer device 170x48 [ 2.394713] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.801990] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A [ 2.802028] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun [ 2.847788] psmouse serio2: elantech: assuming hardware version 4 (with firmware version 0x460f00) [ 2.866689] psmouse serio2: elantech: Synaptics capabilities query result 0x41, 0x17, 0x0c. [ 2.885929] psmouse serio2: elantech: Elan sample query result 00, 66, 85 [ 2.904666] Adding 7812496k swap on /dev/sdb1. Priority:-1 extents:1 across:7812496k FS [ 2.977861] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input10 [ 2.980905] mousedev: PS/2 mouse device common for all mice [ 3.154530] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 3.228348] Bluetooth: Core ver 2.21 [ 3.228363] NET: Registered protocol family 31 [ 3.228365] Bluetooth: HCI device and connection manager initialized [ 3.228369] Bluetooth: HCI socket layer initialized [ 3.228372] Bluetooth: L2CAP socket layer initialized [ 3.228378] Bluetooth: SCO socket layer initialized [ 3.233261] usbcore: registered new interface driver btusb [ 3.237943] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200 [ 3.237947] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin [ 3.486490] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.486495] Bluetooth: BNEP filters: protocol multicast [ 3.486501] Bluetooth: BNEP socket layer initialized [ 3.656006] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 3.718819] hidraw: raw HID events driver (C) Jiri Kosina [ 3.723291] usbcore: registered new interface driver usbhid [ 3.723295] usbhid: USB HID core driver [ 3.726235] input: Razer Razer Abyssus 1800 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:1532:0020.0001/input/input17 [ 3.726425] hid-generic 0003:1532:0020.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Abyssus 1800] on usb-0000:00:1a.0-1.2/input0 [ 3.726598] input: Razer Razer Abyssus 1800 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:1532:0020.0002/input/input18 [ 3.730907] media: Linux media interface: v0.10 [ 3.736655] Linux video capture interface: v2.00 [ 3.777471] hid-generic 0003:1532:0020.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Abyssus 1800] on usb-0000:00:1a.0-1.2/input1 [ 3.791895] [drm:intel_enable_lvds [i915]] *ERROR* timed out waiting for panel to power on [ 3.807596] uvcvideo: Found UVC 1.00 device LG HD WebCam (2232:1053) [ 3.816226] input: LG HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input19 [ 3.816351] usbcore: registered new interface driver uvcvideo [ 3.816354] USB Video Class driver (1.1.1) [ 4.045040] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 4.051142] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready [ 4.051417] enp6s0: 0xffffc9000077a000, 00:e0:91:4f:13:06, IRQ 27 [ 4.269849] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready [ 4.368434] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 4.804445] fuse init (API version 7.23) [ 5.730772] wlp1s0: authenticate with 14:cc:20:8e:d3:54 [ 5.747365] wlp1s0: send auth to 14:cc:20:8e:d3:54 (try 1/3) [ 5.750050] wlp1s0: authenticated [ 5.750808] wlp1s0: associate with 14:cc:20:8e:d3:54 (try 1/3) [ 5.755396] wlp1s0: RX AssocResp from 14:cc:20:8e:d3:54 (capab=0x431 status=0 aid=3) [ 5.755629] wlp1s0: associated [ 5.755643] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 5.776434] Bluetooth: RFCOMM TTY layer initialized [ 5.776445] Bluetooth: RFCOMM socket layer initialized [ 5.776454] Bluetooth: RFCOMM ver 1.11 [ 8.647862] usb 3-4: reset full-speed USB device number 3 using xhci_hcd [ 11.347990] Bluetooth: hci0 urb ffff880119915840 failed to resubmit (113) [ 81.425729] Bluetooth: hci0 urb ffff8800d31980c0 failed to resubmit (113) [ 91.506623] Bluetooth: hci0 urb ffff8800d2b60b40 failed to resubmit (113)

Especial · por **chmercesmoreira** » 20 Jul 2016, 20:21 • MS 4

Parece que você está tendo problemas com bluetooth, eu passei por isso esse ano mas no meu caso era um problema de interferência entre as frequências do bluetooth e do wireless, cheguei a pedir ajuda no fórum do Arch internacional mas acabei descobrindo como resolver sozinho: https://bbs.archlinux.org/default.html"codebox">

Código: Selecionar todos

less /proc/modules | grep -i rtl

E me mostra o resultado aqui.

Aprendiz · por **Askazy** » 20 Jul 2016, 20:24 • MS 5

chmercesmoreira escreveu:Parece que você está tendo problemas com bluetooth, eu passei por isso esse ano mas no meu caso era um problema de interferência entre as frequências do bluetooth e do wireless, cheguei a pedir ajuda no fórum do Arch internacional mas acabei descobrindo como resolver sozinho: https://bbs.archlinux.org/default.html"codebox">
Código: Selecionar todos
less /proc/modules | grep -i rtl

E me mostra o resultado aqui.

Segue abaixo

Código: Selecionar todos: btrtl 16384 1 btusb, Live 0xffffffffa0606000 bluetooth 454656 39 rfcomm,bnep,btusb,btrtl,btbcm,btintel, Live 0xffffffffa0943000 rtl8723ae 81920 0 - Live 0xffffffffa088f000 btcoexist 53248 1 rtl8723ae, Live 0xffffffffa080e000 rtl8723_common 20480 1 rtl8723ae, Live 0xffffffffa03d4000 rtl_pci 28672 1 rtl8723ae, Live 0xffffffffa0555000 rtlwifi 65536 2 rtl8723ae,rtl_pci, Live 0xffffffffa07fd000 mac80211 647168 2 rtl_pci,rtlwifi, Live 0xffffffffa0645000 cfg80211 483328 2 rtlwifi,mac80211, Live 0xffffffffa04bf000

Especial · por **chmercesmoreira** » 20 Jul 2016, 20:39 • MS 6

Acredito que não seja o mesmo problema que o meu caso anterior, fiz algumas pesquisas no Google com o nome desse módulo rtl8723ae e encontrei diversos tópicos de pessoas com problemas de lentidão mas nenhuma apresentou uma solução, você já testou outro sistema sem ser o Manjaro e a lentidão continuou? Já testou no Windows? Se a lentidão continuar em todos os sistemas é provável que o problema seja na placa, caso não, então é problema de compatibilidade do driver.

Aprendiz · por **Askazy** » 20 Jul 2016, 20:40 • MS 7

chmercesmoreira escreveu:Acredito que não seja o mesmo problema que o meu caso anterior, fiz algumas pesquisas no Google com o nome desse módulo rtl8723ae e encontrei diversos tópicos de pessoas com problemas de lentidão mas nenhuma apresentou uma solução, você já testou outro sistema sem ser o Manjaro e a lentidão continuou? Já testou no Windows? Se a lentidão continuar em todos os sistemas é provável que o problema seja na placa, caso não, então é problema de compatibilidade do driver.

No windows funcionava normalmente, testei no Ubuntu e também tinha esse problema , e agora no Manjaro pelo visto também.

Especial · por **chmercesmoreira** » 22 Jul 2016, 15:07 • MS 8

Tenta aplicar as alterações citadas aqui: https://wiki.archlinux.org/index.html/Wi ... Frtl8723be
Crie o arquivo /etc/modprobe.d/rtl8723ae.conf com o conteúdo citado no link acima para problemas de economia de energia, use o comando:

Código: Selecionar todos: echo "options rtl8723ae fwlps=0" | sudo tee /etc/modprobe.d/rtl8723ae.conf

Reinicie o sistema e faça novos testes.
Não sei se vai ajudar mas como é um problema frequente com esse driver pode ser o seu caso, depois deixa um feedback.

@edit

Outra alternativa é você instalar a versão do driver mais atualizada, aquele link que você postou acima tem um pacote no AUR:
https://aur.archlinux.org/packages/rtlwifi_new-dkms/
Tente isso também.
Aqui no fórum do Manjaro internacional outra pessoa passou por um problema parecido com o seu:
https://forum.manjaro.org/t/realtek-sem ... mes/3104/8

Aprendiz · por **Askazy** » 24 Jul 2016, 18:13 • MS 9

chmercesmoreira escreveu:Tenta aplicar as alterações citadas aqui: https://wiki.archlinux.org/index.html/Wi ... Frtl8723be
Crie o arquivo /etc/modprobe.d/rtl8723ae.conf com o conteúdo citado no link acima para problemas de economia de energia, use o comando:
Código: Selecionar todos
echo "options rtl8723ae fwlps=0" | sudo tee /etc/modprobe.d/rtl8723ae.conf

Reinicie o sistema e faça novos testes.
Não sei se vai ajudar mas como é um problema frequente com esse driver pode ser o seu caso, depois deixa um feedback.

@edit

Outra alternativa é você instalar a versão do driver mais atualizada, aquele link que você postou acima tem um pacote no AUR:
https://aur.archlinux.org/packages/rtlwifi_new-dkms/
Tente isso também.
Aqui no fórum do Manjaro internacional outra pessoa passou por um problema parecido com o seu:
https://forum.manjaro.org/t/realtek-sem ... mes/3104/8

Testei o driver disponível no AUR e infelizmente nenhuma mudança, seria isso algum conflito com o driver que já vem no kernel

Código: Selecionar todos: DKMS: add completed. Error! echo Your kernel headers for kernel 4.4.13-1-MANJARO cannot be found at /usr/lib/modules/4.4.13-1-MANJARO/build or /usr/lib/modules/4.4.13-1-MANJARO/source. ##################################### To avoid conflict with the original modules provided by the kernel, the dkms modules were renamed to '<module_name>_dkms'. Should you need to manually load the module, use 'modprobe <module_name>_dkms'. To remove the modules, use 'rmmod <module_name>' instead. :: Executando hooks pós-transação... (1/1) Install DKMS modules ==> No kernel 4.4.13-1-MANJARO headers. You must install them to use DKMS!

== Editado em 24 Jul 2016, 18:37 ==

UPDATE: Depois de reiniciar o sistema perdi a conexão wifi, tive que desinstalar o driver para voltar a conexão.

Especial · por **chmercesmoreira** » 24 Jul 2016, 18:54 • MS 10

Pelas mensagens de erro parece que você não tem o pacote de headers referentes a versão do seu Kernel instalada, tente instalar o pacote linux44-headers usando o pacman.